Global Wireless Intrusion Detection and Prevention Systems (WIPDS) Sales Market Report 2023
SKU ID : QYR-22289665 | Publishing Date : 02-Jan-2023 | No. of pages : 127
Market Analysis and Insights: Global Wireless Intrusion Detection and Prevention Systems (WIPDS) Market
Wireless intrusion detection systems (WIDS) and wireless intrusion protection systems (WIPS) are used to continuously protect a wireless network and in some cases, a wired network, from unauthorized users. There are some basic differences between the two systems. In a WIDS, a system of sensors is used to monitor the network for the intrusion of unauthorized devices, such as rogue access points. In a WIPS, the system not only detects unauthorized devices, but also takes steps to mitigate the threat by containing the device and detaching it from the wireless network.
WIDS and WIPS operate 24/7 and generally require no management or admin involvement. They guard the wireless local area network (WLAN) on a constant basis and listen to all radio traffic within the WLAN's operating frequencies. There are many similarities between WIDS and WIPS, and most of the systems currently available fundamentally act as a WIPS because they are designed to detect and prevent wireless intrusion.The typical WIPS has three components: a server, a management console, and a collection of distributed sensors.
The WIPS server can be either hardware- or software-based. The server performs system management and configuration tasks, signature, behavior and protocol analysis, as well as radio frequency (RF) spectrum analysis to detect intrusion.Signature analysis monitors traffic for patterns associated with known attacks, such as denial of service (DoS) and man-in-the-middle attacks. Behavior analysis looks for anomalies in message behavior such as the use of purposefully malformed management frames that allow an attacker to observe the network's resulting behavior. This behavior may reveal flaws in security or application programming that would allow intrusion. While signature analysis looks for known attack patterns, behavioral analysis looks for anomalous patterns that could indicate a new attack. Behavioral analysis also compares historical usage metrics to anomalous traffic to indicate unusual traffic that may be an attempt to probe vulnerable systems.
Protocol analysis is used to inspect and disassemble layer-2 information—the MAC protocol data unit (MPDU)—to discover anomalies in the frame header and trailer. Protocol analysis is also used to dissect the layer 3 to 7 data contained in the frame body, which contains the payload. This is referred to as the MAC service data unit (MSDU). Both the MPDU and MSDU data are analyzed for spurious data that could be leveraged to compromise the security or medium arbitration functions of the system.RF Spectrum analysis is used to monitor the frequency on which the system is operating for unwanted or damaging signals.
A common DoS attack method is a transmitter continuously transmitting on the operating frequency, which can disable a Wi-Fi system. Bluetooth devices, baby monitors, and microwave ovens can be disrupted by 2.4-GHz systems. Better WIPS can do sophisticated signature analysis and identify these harmless sources of interferences and locate them for mitigation. One of the benefits of spectrum analysis is the ability to identify and locate sources of interference, whether malicious or otherwise.
Due to the COVID-19 pandemic, the global Wireless Intrusion Detection and Prevention Systems (WIPDS) market size is estimated to be worth US$ 1231.4 million in 2022 and is forecast to a readjusted size of US$ 2529.2 million by 2029 with a CAGR of 10.7% during the forecast period 2023-2029. Fully considering the economic change by this health crisis, Wireless Intrusion Detection Systems (WIDS) accounting for % of the Wireless Intrusion Detection and Prevention Systems (WIPDS) global market in 2022, is projected to value US$ million by 2029, growing at a revised % CAGR from 2023 to 2029. While Finance segment is altered to an % CAGR throughout this forecast period.
The key players are Cisco, IBM, Check Point, HP, Netscout, AirWave (Aruba), Extreme Networks, Fortinet, ForeScout, WatchGuard, Venustech, Topsec, Qihoo 360 and so on. Cisco and IBM are the top 2, with about 31% market shares.
Global Wireless Intrusion Detection and Prevention Systems (WIPDS) Scope and Market Size
The global Wireless Intrusion Detection and Prevention Systems (WIPDS) market is segmented by company, region (country), type and application. Players, stakeholders, and other participants in the global Wireless Intrusion Detection and Prevention Systems (WIPDS) market will be able to gain the upper hand as they use the report as a powerful resource. The segmental analysis focuses on sales, revenue and forecast by region (country), type and application for the period 2018-2029.
Segment by Type
Wireless Intrusion Detection Systems (WIDS)
Wireless Intrusion Prevention Systems (WIPS)
Segment by Application
Finance
Government
IT and Telecom
Health
Utilities
Others
By Region
United States
Europe
China
Japan
Southeast Asia
India
Other Regions
By Company
Cisco
IBM
Check Point
HP
Netscout
AirWave (Aruba)
Extreme Networks
Fortinet
ForeScout
WatchGuard
Venustech
Topsec
Qihoo 360
Wireless intrusion detection systems (WIDS) and wireless intrusion protection systems (WIPS) are used to continuously protect a wireless network and in some cases, a wired network, from unauthorized users. There are some basic differences between the two systems. In a WIDS, a system of sensors is used to monitor the network for the intrusion of unauthorized devices, such as rogue access points. In a WIPS, the system not only detects unauthorized devices, but also takes steps to mitigate the threat by containing the device and detaching it from the wireless network.
WIDS and WIPS operate 24/7 and generally require no management or admin involvement. They guard the wireless local area network (WLAN) on a constant basis and listen to all radio traffic within the WLAN's operating frequencies. There are many similarities between WIDS and WIPS, and most of the systems currently available fundamentally act as a WIPS because they are designed to detect and prevent wireless intrusion.The typical WIPS has three components: a server, a management console, and a collection of distributed sensors.
The WIPS server can be either hardware- or software-based. The server performs system management and configuration tasks, signature, behavior and protocol analysis, as well as radio frequency (RF) spectrum analysis to detect intrusion.Signature analysis monitors traffic for patterns associated with known attacks, such as denial of service (DoS) and man-in-the-middle attacks. Behavior analysis looks for anomalies in message behavior such as the use of purposefully malformed management frames that allow an attacker to observe the network's resulting behavior. This behavior may reveal flaws in security or application programming that would allow intrusion. While signature analysis looks for known attack patterns, behavioral analysis looks for anomalous patterns that could indicate a new attack. Behavioral analysis also compares historical usage metrics to anomalous traffic to indicate unusual traffic that may be an attempt to probe vulnerable systems.
Protocol analysis is used to inspect and disassemble layer-2 information—the MAC protocol data unit (MPDU)—to discover anomalies in the frame header and trailer. Protocol analysis is also used to dissect the layer 3 to 7 data contained in the frame body, which contains the payload. This is referred to as the MAC service data unit (MSDU). Both the MPDU and MSDU data are analyzed for spurious data that could be leveraged to compromise the security or medium arbitration functions of the system.RF Spectrum analysis is used to monitor the frequency on which the system is operating for unwanted or damaging signals.
A common DoS attack method is a transmitter continuously transmitting on the operating frequency, which can disable a Wi-Fi system. Bluetooth devices, baby monitors, and microwave ovens can be disrupted by 2.4-GHz systems. Better WIPS can do sophisticated signature analysis and identify these harmless sources of interferences and locate them for mitigation. One of the benefits of spectrum analysis is the ability to identify and locate sources of interference, whether malicious or otherwise.
Due to the COVID-19 pandemic, the global Wireless Intrusion Detection and Prevention Systems (WIPDS) market size is estimated to be worth US$ 1231.4 million in 2022 and is forecast to a readjusted size of US$ 2529.2 million by 2029 with a CAGR of 10.7% during the forecast period 2023-2029. Fully considering the economic change by this health crisis, Wireless Intrusion Detection Systems (WIDS) accounting for % of the Wireless Intrusion Detection and Prevention Systems (WIPDS) global market in 2022, is projected to value US$ million by 2029, growing at a revised % CAGR from 2023 to 2029. While Finance segment is altered to an % CAGR throughout this forecast period.
The key players are Cisco, IBM, Check Point, HP, Netscout, AirWave (Aruba), Extreme Networks, Fortinet, ForeScout, WatchGuard, Venustech, Topsec, Qihoo 360 and so on. Cisco and IBM are the top 2, with about 31% market shares.
Global Wireless Intrusion Detection and Prevention Systems (WIPDS) Scope and Market Size
The global Wireless Intrusion Detection and Prevention Systems (WIPDS) market is segmented by company, region (country), type and application. Players, stakeholders, and other participants in the global Wireless Intrusion Detection and Prevention Systems (WIPDS) market will be able to gain the upper hand as they use the report as a powerful resource. The segmental analysis focuses on sales, revenue and forecast by region (country), type and application for the period 2018-2029.
Segment by Type
Wireless Intrusion Detection Systems (WIDS)
Wireless Intrusion Prevention Systems (WIPS)
Segment by Application
Finance
Government
IT and Telecom
Health
Utilities
Others
By Region
United States
Europe
China
Japan
Southeast Asia
India
Other Regions
By Company
Cisco
IBM
Check Point
HP
Netscout
AirWave (Aruba)
Extreme Networks
Fortinet
ForeScout
WatchGuard
Venustech
Topsec
Qihoo 360
Frequently Asked Questions
This market study covers the global and regional market with an in-depth analysis of the overall growth prospects in the market. Furthermore, it sheds light on the comprehensive competitive landscape of the global market. The report further offers a dashboard overview of leading companies encompassing their successful marketing strategies, market contribution, recent developments in both historic and present contexts.
- By product type
- By End User/Applications
- By Technology
- By Region
The report provides a detailed evaluation of the market by highlighting information on different aspects which include drivers, restraints, opportunities, and threats. This information can help stakeholders to make appropriate decisions before investing.